Drinking RO Water Plant

Treatment Scheme:

Raw Water Treatment:Raw water source should be well protected, available easily, un-contaminated, like - Bore well water Line, Closed Ring Well, Municipal Supply Line or Other source where treatment is possible.

Raw Water Storage Tank:Water is transferred to Raw Water Storage Tanks using proper pumping system and un-contaminating piping work.

Raw Water Feed Pump:Either Submersible Pump or surface mounted Centrifugal pump can be used with good quality UPVC or CPVC or SS piping can be used for this application.

Multigrade Sand Filter:Water is passed through Multi Media Filter with the help of Feed pump of suitable capacity to remove suspended impurities.

Activated Carbon Filter:Activated Carbon Filter removes excess chlorine (de-chlorination), odour, colour and turbidity due to colloidal suspended impurities and organic impurities.

Anti Scalant Dosing Pump:De chlorinated water is then dosed with Anti Scalant Solution to avoid scale formation on the membrane.

Micron Cartridge Filter:Water is further passed through 10-micron cartridge filter to remove micron particles to avoid clogging of the RO membrane and to improve the silt density index.

High Pressure Pump:The pump supplies the pressure needed to push water through the membrane, even as the membrane rejects the passage of salt through it. It requires a large amount of energy.

Reverse Osmosis System:Reverse Osmosis unit will reduce the dissolved Salts up to 95% of the In feed TDS.

pH Dosing System:Liming material is used to adjust pH between 6.8 and 8.1 to meet the potable water specifications, primarily for effective disinfection and for corrosion control.

U.V. System:The water runs through a UV system just before dispensing from the faucet for 99.99% destruction of bacteria, virus & protozoan cysts.

Ozonation:Raw water is Ozonated to oxidize the organic impurities that kill bacteria and virus.

Product Water Storage Tank:Treated water from RO unit will be stored into SS tank.

Micron Cartridge Filter:This treated water is then passed through 0.2 micron cartridge filter before it is taken for the filling.

Filling Section:Finally the treated is ready to be filled in bottles, jars, glasses or pouches.

Laboratory testing as per ISI standard:

Treated water is tested using IN HOUSE Water Testing laboratory Where Chemical and Micro Biologically Water is tested for Chemical and Micro Biological parameters. For this, a complete full fledge Water Testing CHEMICAL and MICRO BIOLOGICAL Lab is required. However, water is also tested for Pesticide and Radio-nuclear parameters in outside Bureau of Indian standards approved laboratory.

To be provided by Client: